Ten Tips for Steaming Your Wedding Dress (2024)

Many of our brides get nervous when we suggest they steam their gown the morning of the wedding, but unless you have a wrinkle-free fabric (possible, but rare in wedding gowns) or the dress won't need to be transported very far from the shop, (again, possible but rare), you will be so grateful to have taken the time to ensure your gown looks as fresh and smooth as possible! Really, there's no need to worry—with a little preparation you'll feel totally confident in getting your gown ready.

1. Check your fabric—do you really need a steamer?Shantung, dupioni, and taffeta can actually look more wrinkly after steaming, so check the fabric of your gown and ask your tailor if you have any questions. These types of materials aren't very prominent in today’s styles, but they can be very striking when done well. For gowns made with these fabrics, its best to use a dry iron (usually medium to low heat) and a CLEAN white press cloth—ideally a thin weave, like a new dish towel. Remember—these fabrics will wrinkle pretty easily throughout the day, so embrace their organic nature!

2. Too much fuss? Get the bathroom steamy.Some gowns really won't need much to help the wrinkles fall out. Especially if you're traveling or using a non-traditional location to get ready, transporting a steamer might seem like a hassle. If you have a relatively simple dress in a polyester or heavy lace, with a minimal skirt and train that haven't been squished into a bag, don’t stress about getting a steamer. Hang the dress on the bathroom door or a high hook in the bathroom before you shower, probably the night before the wedding, when you can leave the dress out of its bag safely overnight. Crank the heat in the shower, take your time, and get the room full of steam—this is really all some gowns need!

3. Designate a responsible steamer. If you have room in the budget, the best way to ensure your gown is perfectly cared for is to hire a professional steamer. However, if that seems like an unnecessary expense, or not possible at your location, ask someone you trust who will be getting ready with you the wedding morning. It's a great job for an eager bridesmaid or future mother-in-law who wants to be helpful in the morning of the big day! Asking your loved ones to help you prepare really can make them feel included, but it's a great idea to designate someone before the actual wedding morning who feels comfortable steaming the gown and can read up on some tricks, or even practice using a steamer!

4. Secure a steamer. Make sure where you will be getting ready either has a quality steamer—most hotels will, especially in Chicago—or purchase your own. A friend may also have one you can borrow, but check that it's in good condition—some steamers that haven't been used in a long time and had some water sitting in them can spew some discolored water that you won't want anywhere near your pristine, white gown. It can truly be a worthwhile investment if you choose to purchase one—you'll be amazed by how often you'll use them once you have the option on your regular work clothes or co*cktail dresses! Chances are your bridesmaids will need their dresses steamed as well, so let them know what time the steamer will be available so they can plan accordingly.

5. Ask your tailor for any suggestions for maintaining your gown’s shape. The way you hang the dress on the hanger to be steamed is important, and may be different than the recommended way to store it. Some dresses will benefit from gently holding a skirt hem taut, using a balled-up towel to help hold the shape of the bust area, or hanging the sleeves in a certain way. Every gown is different but your tailor can give you some suggestions as they have lots of experience with a variety of shapes and fabrics!

6. Cover steamer head with fabric. A clean white t-shirt you don't care about, or a thin white towel should work just fine. This is to catch any drops of water that could leave marks on the dress, and to prevent any drops from burning your arm as you steam! Do remember that the steam itself can burn as well, so be sure to never put any body part in the direct path of the steam.

7. Steam from the inside and with distance. This is another precaution against damaging the fabric. Most dresses you can steam from the outside if you're using a covering to catch any drops, but it's still safest to steam from the inside of the fabric. NEVER touch the steamer directly to the fabric—instead hold it 3-6 inches away. It's usually best to steam each layer of the skirt separately, but steaming several layers of tulle together usually works just fine.

8. Don't forget the veil! Veils are often the most easily wrinkled part of the look, and can really detract from your crisp, smooth dress if not attended to! Veils can add a beautiful airbrushing effect when steamed. They're usually very easy to steam, though they can take a while. Be careful of any rhinestones or decorations that might be glued so as not to melt the glue and slip out of place, or off entirely. And when using vintage veils, make sure to keep the steamer on a low setting, as many of the old polyesters are delicate and could possibly melt. It's unlikely, but better safe than sorry!

9. Get into the dress carefully. The trick is to not undo all that beautiful steaming that was just done! Always put your shoes on first, as it is much more difficult after the gown is on. If it's possible to have someone stand on a chair, dropping the dress over you skirt first, while you protect your hair and makeup with your arms, that is ideal. Most makeup artists will come prepared with a face covering for this process as well. This method is not possible with some dresses, so if that is the case, while you are sitting down, enlist a helper to guide the dress up your legs, until there is a spot of floor you can stand on while your friend helps the gown be situated, while bunching as little fabric as possible. Use your alterations appointments to note what works best, and ask your tailor for any specific suggestions.

10. HAVE FUN! Remember—this day is about so much more than your gown. No one will notice a few wrinkles when they see the way you look at your fiancé as you walk down that aisle! If your ceremony requires sitting or kneeling you might add a few creases, but that's all part of the beauty of the day. Let the photographer and maid of honor worry about adjusting the gown for you—it's your day to enjoy every little moment!

Ten Tips for Steaming Your Wedding Dress (2024)

FAQs

Ten Tips for Steaming Your Wedding Dress? ›

Check Your Dress Material

Certain fabrics, like satin, silk, tulle, and polyester, are all safe to steam to remove wrinkles and folds. Other wedding dress materials, however, should not be steamed.

Is it safe to steam a wedding dress? ›

Check Your Dress Material

Certain fabrics, like satin, silk, tulle, and polyester, are all safe to steam to remove wrinkles and folds. Other wedding dress materials, however, should not be steamed.

How do you steam train a wedding dress? ›

Keeping the steamer underneath the dress layers allows excess steam to be trapped in the layers, helping it to release more wrinkles in the drying process. Once you've finished the front of the gown, turn it around to catch the back- doing it in this order will prevent the train from being crumpled up as it's drying.

Can you steam a wedding dress to get wrinkles out? ›

If you have a steamer for your home use, it will work well for your wedding dress too. There's no need to invest in a professional steamer for your wedding day alone. You can also call ahead to your hotel or wherever you'll be getting ready before your wedding to see if they have a steamer or iron that you may borrow.

What to avoid in wedding dress? ›

10 Mistakes to Avoid When Choosing a Wedding Dress
  • Bringing a large entourage. ...
  • Trying On Too Many Dresses. ...
  • Deciding in advance on a style of gown. ...
  • Demanding the Wrong Size. ...
  • Expecting it to fit without alterations. ...
  • Looking at a dress-in-a-bag. ...
  • Buying online. ...
  • Not choosing your store carefully.

How long after steaming a dress can you wear it? ›

Let the dress dry completely before you put it on.

Leave it alone for 10 to 15 minutes to let it dry and cool off before you wear it. If there are wrinkles that didn't come out, you may need to iron the material or use a steamer.

How long does steaming a wedding dress take? ›

On your wedding day, you will be busy socializing, taking photos, and getting your bridal hair and makeup done. Steaming your wedding dress can take 1-3 hours depending on how long your train is. Make sure you are not the one doing it!

How much does it cost to get a wedding dress steamed? ›

Steaming services start at $65 and depend on the size and length of the dress. An average bridal gown runs between $105 and $165.

Can I steam my own wedding gown? ›

Cover steamer head with fabric.

A clean white t-shirt you don't care about, or a thin white towel should work just fine. This is to catch any drops of water that could leave marks on the dress, and to prevent any drops from burning your arm as you steam!

How do you Unwrinkle a wedding dress? ›

Hang in Your Bathroom with the Shower Running.

This is an easy, gentle way to de-wrinkle your chiffon dress. Hang your chiffon wedding dress on a clean hanger (preferably a fabric one; wood and plastic may put too much pressure on your gown's straps), hang it on the back of your door, and turn the shower water on hot.

Do dry cleaners steam dresses? ›

Dry cleaners utilise professional techniques to effectively steam wedding dresses. They employ specialised equipment and expertise to delicately remove wrinkles and freshen the fabric. This process ensures that the dress retains its original beauty and is ready for the bride's special day.

How do I keep my wedding dress from wrinkling? ›

"The key here is to keep your gown covered and as wrinkle-free as possible." Make sure wherever you put it is very dark and dry so that humidity and light don't get to the dress. Schoneveld recommends a dark closet with enough space to ensure the dress is not crushed.

Should I steam or iron silk dress? ›

Always steam silk garments if you can. The steam will gently remove any visible creases and wrinkles and add luster to the fabric. The hot steam from a steamer also removes odors and kills bacteria, while nourishing the textile fibers and allowing them to regain their natural shape.

Top Articles
Latest Posts
Article information

Author: Tish Haag

Last Updated:

Views: 6434

Rating: 4.7 / 5 (67 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Tish Haag

Birthday: 1999-11-18

Address: 30256 Tara Expressway, Kutchburgh, VT 92892-0078

Phone: +4215847628708

Job: Internal Consulting Engineer

Hobby: Roller skating, Roller skating, Kayaking, Flying, Graffiti, Ghost hunting, scrapbook

Introduction: My name is Tish Haag, I am a excited, delightful, curious, beautiful, agreeable, enchanting, fancy person who loves writing and wants to share my knowledge and understanding with you.